Most people assume that replacing an outlet or adding a circuit is handyman territory. It is not. Outlet work, switch installation, and new circuits all touch the wiring inside the wall, and in a city where a substantial share of the housing stock was built well before modern electrical codes existed, what looks like a simple swap can open up something more complicated behind the plate. That is when you want an electrician on the call, not someone working around what they find.
We handle electrical work throughout Long Branch for homeowners, rental property owners, and commercial tenants alike. From a single dead outlet to a full panel replacement, the scope of what we take on is broad, and we bring the same approach to every job: scope it on the call, confirm the price before scheduling, and do the work right.
An outdoor outlet that is not properly enclosed is a problem waiting to surface, especially in a coastal area where moisture and salt air put pressure on exposed electrical components. We install weatherproof outlets and in-use covers for exterior walls, garages, decks, and outbuildings. The circuit behind the outlet gets GFCI protection where code requires it, and the enclosure is rated for the exposure it will face.
The situation that leads to this call is usually one of three things: an outlet that stopped working, a room that does not have enough receptacles for how it is being used, or a switch that is loose, buzzing, or simply worn out. We diagnose before we replace, because a dead outlet is sometimes a tripped GFCI upstream rather than a failed receptacle. Arc-fault protection gets added where the existing circuit does not have it and the job calls for it.
Running a separate structure off the main panel works fine up to a point. When a garage becomes a workshop, or a detached outbuilding starts carrying real load, a subpanel is the right answer. It gives the structure its own breaker capacity without overloading the main service, and it keeps the wiring to the structure code-compliant. We size the subpanel to what the space actually needs, not just what it needs today.
Nor'easters and coastal storms move through this region with enough regularity that backup power is a practical decision for a lot of households and businesses here. The electrical work centers on the transfer switch, which is what keeps generator power isolated from the utility line during an outage. Without a proper transfer switch, a generator running during an outage creates a hazard for anyone working to restore power on the line. We install the transfer switch, run the dedicated circuit, and confirm the panel can carry the generator load before the work is scheduled.
Your time matters, so we keep the wiring job moving, and that starts with the call. When you reach us, we ask about the job, scope what is involved, and give you a price before anything is scheduled. You know what the work covers and what it costs before we set a time.
For problems that will not keep, we take short-notice calls when the schedule allows. A burning smell near an outlet, a breaker that trips immediately after being reset, or an outlet that is hot to the touch are situations worth calling about right away. Describe what you are seeing when you call and we will tell you what the schedule can accommodate.
For tenants and businesses that need to stay operational, we talk through what the work involves on the call and plan around it. Some jobs require a circuit to go down for part of the visit. Knowing that in advance lets everyone prepare, and we confirm the scope and the sequence before we arrive.
Attics, crawl spaces, and tall ceilings change how a job gets planned, not just how it gets done. Running new wiring through a finished attic with low clearance takes longer than the same run through an open basement, and the quote reflects that. We account for access when we scope the job, so the price you hear on the call is built around what the work actually involves at your property.
Tall ceilings come up most often with ceiling fan installation and light fixture work. A fan installation in a two-story entryway is a different job from one in a standard bedroom, and we plan for it. We protect your floors and finishes while we work, which matters when the path to the work area crosses a finished room.
Older homes in Long Branch sometimes have wiring that was run through spaces that were never meant to be accessed again. Homes in this area were wired in different decades, and it shows in the panels. When we open a wall or pull an attic hatch and find something unexpected, we explain what we found before the scope changes.
Inside a home, the calls we take most often are for recessed lighting installation, fixture replacement, and dimmer switch wiring. Recessed LED retrofits are worth doing at the same time as other ceiling work, because the access is already open. A dimmer that is paired with the wrong fixture type buzzes and flickers, and we confirm compatibility before the switch goes in.
Outside, security lighting and motion sensor lights are the most common requests. A well-placed exterior light covers a driveway or entry point without washing the whole yard. We also install weatherproof outlet circuits for outdoor lighting that is not hardwired, and landscape lighting circuits where the run needs to come from the panel rather than a plug-in transformer.
For rental properties and commercial spaces, lighting upgrades often come up alongside other electrical work. If a panel visit or outlet run is already scheduled, adding a fixture or a circuit at the same time is worth asking about on the call.
Electrical pricing depends on what the job actually involves, and that is not always clear until the work is scoped. Three things move a quote: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made.
A panel that is already near capacity adds work to an EV charger installation or a subpanel run. Wiring that is knob-and-tube or aluminum changes the scope of an outlet replacement. A crawl space with limited clearance adds time to a circuit run. We ask about all of this on the call so the price we give you reflects the actual job, not a best-case version of it.
When you call (732) 399-4956, you get a price before anything is scheduled.
If the job scope changes once we are on site and something unexpected comes up, we explain it before the work continues. The wiring done properly, start to finish, means no gaps between what was quoted and what was done. The parts people usually ask about are covered on the page listing our electrical services.
Long Branch sits in a part of Monmouth County where the electrical work we take on runs the full range, from older residential properties with legacy wiring to commercial spaces and rental buildings with multiple units. We cover Long Branch and the communities around it.
We also serve:
If your address falls in or near any of these areas, call and we will confirm coverage when you reach us. Scheduling and availability are settled on the call.
Yes. We work in rental properties and multi-unit buildings throughout the area. Whether the call comes from a tenant describing a problem or a property owner coordinating work across several units, we scope the job on the call and confirm what is needed before scheduling. Electrical safety inspections for rental properties are also part of what we do.
Scaffolding is occasionally needed for high exterior fixture installations or work on tall commercial buildings where a ladder is not sufficient. For most residential work, it is not required. If the job you are describing might involve elevated access, mention the height and location when you call and we will confirm what the visit requires.
Large garage equipment such as a car lift typically requires a dedicated 240-volt circuit with a breaker sized to the equipment's rated amperage. We confirm the equipment's electrical specifications on the call and assess whether the existing panel can carry the added load before the circuit is installed.
It does, because older homes often have wiring systems, panel configurations, or circuit layouts that change what a repair or upgrade involves. Knob-and-tube wiring, aluminum branch circuits, and undersized panels all affect scope. We ask about the age and condition of the home on the call so the quote we give you reflects what the job actually requires.
We work every day from 8:00 AM to 9:00 PM, which gives some flexibility for scheduling around a tenant's availability.
Call us at (732) 399-4956 and we will confirm what time works for the property and the tenant.
We discuss billing arrangements on the call when a property manager or landlord is scheduling work across several properties. The invoice goes to whoever is responsible for the account, and we confirm that before the work begins.
Check whether a GFCI outlet nearby has tripped, because a single GFCI can protect several outlets on the same circuit and a tripped one will cut power to all of them. Reset it by pressing the test and reset buttons on the outlet face.
If that does not restore power, or if the outlet feels warm or shows any discoloration, call us at (732) 399-4956 rather than continuing to use it.
We will walk through what you are seeing on the call and get a visit scheduled.
The electrical supply to a heating or cooling unit is our work. That covers the dedicated circuit from the panel, the disconnect, and the grounding and bonding the installation requires. The unit itself, including installation, refrigerant, and ductwork, is the territory of an HVAC contractor, not ours.
No forms, no waiting for a callback.
When you call (732) 399-4956, you reach someone who knows the trade, can scope the job on the phone, and will give you a price before anything is scheduled. We are available every day from 8:00 AM to 9:00 PM.
No guesswork. No shortcuts. No loose ends.
Call (732) 399-4956 and get the work scoped on the call.
We take electrical work in these nearby communities as well: Eatontown, Rumson, Red Bank, Holmdel Township.
See the whole of our whole service area.
Electrical problems do not follow a schedule, and neither does the work it takes to fix them. Below is a plain-language look at the services we handle, what each one covers, and who it is most useful for.
Call (732) 399-4956 any day from 8:00 AM to 9:00 PM to get a price confirmed before anything is scheduled.
| Service Type | Scope of Work | When You Need It | Good to Know |
|---|---|---|---|
| Ceiling Fan Installation | Fan and fixture replacement, New wiring where no fan box exists, Switch and control wiring, Outdoor-rated fan installation | Rooms being updated or any space where no ceiling fan was previously installed | Installing a fan where no existing box is present requires running a new circuit or adding a rated fan box to the existing one. |
| Electrical Panel UpgradesMost Popular | 200-amp service upgrades, Full panel replacement, Subpanel installation, Load calculations before work begins | Homes adding major appliances, EV chargers, or generators, and any property still running an undersized or aging panel | Panel capacity is confirmed against the actual load the property carries before a replacement size is recommended. |
| Outlet & Switch Installation | GFCI and AFCI outlets, 240-volt and weatherproof outlets, Dimmer and three-way switches, USB-integrated receptacles | Rooms with too few outlets or outlets that no longer meet code for their location | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. Older homes frequently lack it. |
Every job is different, and the right answer depends on what is actually in your home or building. Call (732) 399-4956 any day from 8:00 AM to 9:00 PM and we will walk through what you are seeing and confirm a price before anything is scheduled.
(732) 399-4956