Middletown Township Electrical Company handles residential and commercial electrical work across Middletown Township and the wider Monmouth County area. From a single dead outlet to a full panel replacement or whole-home rewiring project, we take on the everyday repairs and the bigger jobs that older homes and growing businesses demand. We work every day from 8:00 AM to 9:00 PM, so you can call when the problem actually shows up.
Call (732) 399-4956 for a quote.
Residential wiring. Commercial wiring. One number for both.
Calling an electrician doesn't have to be stressful, and it starts with a clear picture of what is actually wrong. When we arrive, we work through the symptoms methodically: flickering lights, dead outlets, a breaker that keeps tripping, a burning smell near the panel, or a section of the house that has lost power entirely. Each of those points to something specific, and we find it before any work begins.
Common calls we handle include GFCI outlets that keep tripping in bathrooms, kitchens, and garages, sparking or buzzing outlets, breakers that won't reset, and intermittent power loss that comes and goes without an obvious cause. Arc-fault and ground-fault protection failures show up in older wiring systems more often than people expect, and a buzzing breaker box is rarely something to wait on.
We keep you informed from diagnosis to final test, so you know what we found, what it takes to fix it, and what the work will cost before we pick up a tool. Leave the breakers to us.
Your time matters, so we keep the wiring job moving, and that includes getting the panel assessment done efficiently. A panel that repeatedly trips, runs warm, or simply cannot carry the load a modern home or commercial space demands is not a problem that resolves on its own.
We handle circuit breaker replacement, full breaker panel replacement, and main electrical panel upgrades including 200-amp service upgrades and service-entrance work. If you are still running a fuse box, we convert it to a modern breaker panel. For commercial properties, we work on panel replacements and subpanel installations sized to the actual load the building carries.
Before any panel work is scheduled, we run load calculations to confirm what the home or building genuinely needs. That scoping happens on the call, and the price is confirmed before anything is scheduled. The wiring done properly, start to finish, means the panel is sized right the first time, not patched to get by.
We install and replace the full range of outlets: standard, USB-integrated, GFCI, AFCI, 240-volt, dryer, range, and weatherproof outdoor outlets. If a room needs an additional outlet added, or a dead outlet needs to be properly diagnosed and replaced, we handle both. Dimmer switch installation, light switch replacement, and three-way switch wiring are routine work for us.
Ceiling fan installation and replacement, including wiring where no existing fan box is present, is a common request. We also handle light fixture installation and replacement throughout the home or commercial space. On a visit for this kind of work, we confirm what is needed, explain the scope, and get it done in a single trip where the job allows.
We show up ready to work.
Don't let a small wiring issue turn into a fire risk, and that applies to lighting circuits as much as anything else. Recessed lighting installation and retrofit work, under-cabinet lighting, and LED fixture upgrades are all jobs we handle on the interior side.
Outside, we install exterior light fixtures, security lights, and motion sensor lights. Landscape lighting circuits, outdoor weatherproof outlet installation, and the grounding and bonding work that outdoor circuits require are all part of what a visit covers.
We also wire hardwired smoke detectors and carbon monoxide detectors, and we handle the circuit and wiring side of bathroom exhaust fans and attic fans. We protect your floors and finishes while we work, so the space looks the way it did before we arrived.
For residential and commercial electrical work alike, dedicated circuits are often the part of a project that gets overlooked until something goes wrong. An electric dryer, range, refrigerator, dishwasher, or microwave each performs better and runs more safely on its own dedicated circuit rather than sharing capacity with other loads.
We install 240-volt outlets and circuits for dryers, ranges, and large appliances. We also handle the electrical side of hot tub hookups, sauna wiring, electric fireplace wiring, and workshop or garage electrical installations, including shed wiring where a separate structure needs power run to it.
Whole-home surge protection sits at the panel and guards the entire electrical system against voltage spikes that can damage modern electronics, appliances, and HVAC equipment. It is a single installation that covers everything downstream. Call and we'll get the current flowing right.
For residential and commercial electrical work alike, full rewiring projects follow a clear process: assess what is there, identify what needs to come out, and replace it with wiring that meets current code. Homes in this area were wired in different decades, and it shows in the panels.
We handle whole-home rewiring, basement wiring, garage wiring, and electrical work for home additions and new construction tie-ins. What triggers a full rewire varies. Sometimes it is a home inspection that surfaces aging wiring. Sometimes it is a panel upgrade that reveals how far the branch wiring has deteriorated. Sometimes it is a renovation that opens walls and makes the work practical.
That history of older construction across Monmouth County is exactly why knob-and-tube replacement and aluminum-wiring remediation come up as often as they do here, and why we cover both in detail below.
Monmouth County carries some of the oldest housing stock in New Jersey, and that shows up directly in the electrical calls we take. Legacy wiring systems, panels that were never sized for modern loads, and a coastal storm pattern that puts backup power at the top of the priority list for a lot of households and businesses here all shape what the work actually looks like in this area.
Knob-and-tube wiring was standard in homes built through the mid-twentieth century. It has no ground conductor, runs without conduit through open framing, and degrades in ways that are not always visible from the outside. Aluminum branch wiring, common in homes built during the 1960s and 1970s, expands and contracts under load in a way that loosens connections over time and raises the risk of overheating at outlets and switches.
In this part of New Jersey, a significant share of homes still carry one or both systems. Pre-purchase electrical inspections frequently surface them, and buyers need a clear picture of what remediation involves before closing. The work goes beyond swapping wire. It covers connections, outlets, switches, and bringing the affected circuits into compliance with current code. We scope the job thoroughly before any work begins.
EV adoption in New Jersey ranks among the highest in the country, and Level 2 charger installation is one of the more common residential electrical calls we take in Middletown Township. A Level 2 charger runs on a dedicated 240-volt circuit with a breaker sized to the charger's output. Before installation, we check the panel for available capacity and run load calculations to confirm the service can carry the added draw.
Where the existing panel cannot support the circuit, a panel upgrade is part of the project. We install for indoor garage applications and exterior weatherproof setups. The price for the full scope is confirmed on the call before anything is scheduled.
Nor'easters and coastal storms hit Monmouth County with enough regularity that backup power is a practical consideration, not a luxury. We handle generator hookup and transfer switch installation on the electrical side. A properly wired transfer switch is what isolates your home or building from the utility line during an outage, preventing backfeed that creates a hazard for utility workers restoring power.
We work with both standby generator hookups and portable generator connections, running the dedicated circuit, sizing the panel capacity for the generator load, and completing the grounding and bonding the installation requires. We'll sort the wiring and clean up after.
You shouldn't have to chase an electrician for answers, and that matters as much for a property manager coordinating work across multiple units as it does for a homeowner dealing with a single repair. We handle commercial electrical repair, office wiring, retail electrical installation, and warehouse electrical service.
For landlords and property managers, we carry out rental property electrical repairs, multi-unit electrical work, and electrical safety inspections that document the condition of the wiring and identify anything that needs attention. Pre-purchase electrical inspections for commercial and residential properties give buyers a clear picture of what they are taking on. Troubleshooting and diagnostics, code-compliant wiring, and commercial panel upgrades are all part of the scope we cover for business and rental clients.
Electrician pricing depends on what the job actually involves, and that varies by the scope of the work. A ceiling fan installation is a different conversation from a whole-home rewiring quote or an EV charger installation that requires a panel upgrade. We scope each job individually.
When you call, you get the price confirmed before anything is scheduled. That covers what the work involves, what it will take, and what it costs. There is no pressure to commit on the call. If you have questions about outlet installation cost, panel upgrade pricing, electrical inspection pricing, or what a rewiring project runs in a home your size, ask on the call and you get a straight answer.
No guesswork. No shortcuts. No loose ends.
We serve Middletown Township and the communities around it throughout Monmouth County. Scheduling and availability are confirmed when you call.
We regularly work in:
Breakers that trip repeatedly without an obvious overload, breakers that feel warm to the touch, a burning smell near the panel, visible corrosion or rust inside the cabinet, and a panel that cannot accommodate the circuits the property needs are all signs worth having assessed. A fuse box still in service in an older home is another situation where a panel replacement conversation makes sense. Call us and we will walk through what you are seeing on the phone.
We take calls every day from 8:00 AM to 9:00 PM and handle short-notice work when the schedule allows. If the situation is urgent, describe what is happening when you call and we will tell you what is available. A burning smell, sparking outlets, or a panel that is making noise are situations that should not wait.
A burning smell near an outlet or panel, sparking or arcing wires, an outlet or switch that is hot to the touch, or a breaker that trips immediately after being reset and will not hold are all situations that need same-day attention.
If you are unsure whether what you are seeing is urgent, call (732) 399-4956 and describe it. We will help you assess the situation on the phone.
A breaker trips when the circuit draws more current than it is rated to carry, which is the protection working as it should. When a breaker trips repeatedly on a circuit that is not overloaded, or trips immediately after being reset, that points to a wiring fault, a failing breaker, or a panel issue that needs a proper diagnosis. We trace the circuit from the outlet back to the panel to find the actual cause.
We check the breakers for signs of wear or heat damage, verify that the load is balanced across the two legs of the service, inspect the wiring connections inside the cabinet, and confirm that the grounding and bonding are correct. If GFCI or AFCI breakers are installed, we test them. The condition of the service entrance and the meter connection is also part of the assessment when the job calls for it.
Homes built before the 1970s were wired for a fraction of the electrical load a modern household draws. A kitchen that originally had two circuits now runs a refrigerator, microwave, dishwasher, coffee maker, and multiple small appliances. The wiring and the panel were not designed for that demand, and the result is tripped breakers and too few outlets in the places people need them. Adding dedicated circuits and upgrading the panel are the practical answers.
An outlet that does not power anything plugged into it, feels warm to the touch, shows scorch marks or discoloration around the face plate, or makes a buzzing sound when something is plugged in should not be used until it is inspected. Discoloration usually points to heat from a loose connection or an arc fault. We diagnose the outlet and the circuit behind it, not just the face of the receptacle.
Clear a path to the main panel and to the outlets, switches, or fixtures being worked on. If the work is in a finished room, move furniture away from the walls where the electrician will need access. We will let you know on the call if anything specific needs to be done before the visit, such as turning off a circuit or clearing a storage area near the panel.
Keeping children and pets out of the work area while electrical work is in progress is a good idea for their safety and to let the work proceed without interruption. We will let you know on the call if there are any specific preparations that apply to the job being done.
The scope depends on how much of the wiring is affected and what condition it is in. For knob-and-tube, replacement involves running new grounded wiring through the affected areas and updating the outlets, switches, and connections to current code. For aluminum branch wiring, remediation typically focuses on the connections at outlets, switches, and fixtures, where the expansion and contraction creates the highest risk. We assess the full scope before quoting the work.
Repairs, panel upgrades, rewiring, EV charger installation, backup generator hookups, dedicated circuits, whole-home surge protection, and commercial electrical work are all on the table. We work every day from 8:00 AM to 9:00 PM.
Call (732) 399-4956 to get a quote.
Ready for your wiring. Call now.
Middletown Township Electrical Company is here when the job comes up.
Electrical problems do not follow a schedule, and neither does the work it takes to fix them. Below is a plain-language look at the services we handle, what each one covers, and who it is most useful for.
Call (732) 399-4956 any day from 8:00 AM to 9:00 PM to get a price confirmed before anything is scheduled.
| Service Type | Scope of Work | When You Need It | Good to Know |
|---|---|---|---|
| Dedicated Appliance Circuits | Dryer and range circuits, Refrigerator and dishwasher circuits, Workshop and garage circuits, Shed and outbuilding power runs | Any major appliance that shares a circuit or causes other loads to drop when it cycles on | A dedicated circuit isolates the appliance from other loads so it draws what it needs without tripping breakers or affecting nearby outlets. |
| Basement & Sump-Pump Circuits | Dedicated sump-pump circuit installation, Basement outlet and lighting wiring, GFCI protection in wet locations, Backup power circuit for sump systems | Finished or unfinished basements, and any home where the sump pump shares a circuit with other loads | A sump pump on a shared circuit can lose power at exactly the wrong moment if the breaker trips under load from another appliance. |
| Wiring & Circuit Installation | Whole-home and partial rewiring, Basement and garage wiring, Home addition wiring, Knob-and-tube and aluminum wiring replacement | Older homes with deteriorated wiring, renovations that open walls, and new construction tie-ins | Homes in Monmouth County built before the 1970s frequently carry wiring systems that were not designed for modern electrical loads. |
| Code-Correction Wiring | Bringing circuits up to current code, Aluminum wiring remediation at connections, Grounding upgrades, AFCI and GFCI retrofits | Properties flagged during an inspection or sale, and older homes being renovated | Code corrections are scoped to the specific violations found, not applied as a blanket rewire unless the wiring condition requires it. |
| Breaker & Fuse Repair | Single breaker replacement, Fuse box diagnosis, Arc-fault and ground-fault breaker testing, Panel interior inspection | Homes where a breaker trips repeatedly or a fuse blows without an obvious overload | A breaker that won't hold after being reset is a fault condition, not a nuisance. It needs a diagnosis, not just a reset. |
| Whole-Home Surge Protection | Panel-level surge device installation, Full-system voltage spike protection, Protection for appliances and electronics | Homes with modern electronics, smart appliances, or a history of storm-related power events | A panel-mounted surge protector covers every circuit in the home in a single installation. It does not replace outlet-level surge strips but works alongside them. |
| Lighting Installation | Recessed and LED fixture installation, Exterior and security lighting, Motion sensor lights, Landscape lighting circuits | Interior upgrades, outdoor security, and any space where the existing fixtures are outdated or underpowered | Outdoor lighting circuits require weatherproof wiring and proper grounding. We handle both the fixture and the circuit. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Breakers that trip or won't reset, Flickering or intermittent power, Burning smells and buzzing panels | Any home or business with an unexplained electrical symptom | We trace the fault from the outlet or fixture back to the panel before any parts are replaced. |
| Ceiling Fan Installation | Fan and fixture replacement, New wiring where no fan box exists, Switch and control wiring, Outdoor-rated fan installation | Rooms being updated or any space where no ceiling fan was previously installed | Installing a fan where no existing box is present requires running a new circuit or adding a rated fan box to the existing one. |
| Electrical Panel UpgradesMost Popular | 200-amp service upgrades, Full panel replacement, Subpanel installation, Load calculations before work begins | Homes adding major appliances, EV chargers, or generators, and any property still running an undersized or aging panel | Panel capacity is confirmed against the actual load the property carries before a replacement size is recommended. |
| Electrical Safety Inspections | Panel and wiring condition assessment, GFCI and AFCI testing, Grounding and bonding check, Pre-purchase inspection reporting | Home buyers, sellers, landlords, and any property where the wiring history is unknown | An inspection documents what is present and identifies what needs attention. It gives buyers and owners a clear picture before decisions are made. |
| Outlet & Switch Installation | GFCI and AFCI outlets, 240-volt and weatherproof outlets, Dimmer and three-way switches, USB-integrated receptacles | Rooms with too few outlets or outlets that no longer meet code for their location | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. Older homes frequently lack it. |
What are the signs that a home needs rewiring rather than just a repair?
Rewiring becomes the practical answer when multiple circuits are affected, when the existing wiring is knob-and-tube or deteriorated aluminum, or when a renovation opens walls and reveals wiring that does not meet current code. A single dead outlet is usually a repair. Repeated faults across different parts of the house, a panel that cannot be brought up to capacity without replacing the branch wiring, or an inspection that surfaces widespread degradation are all situations where rewiring the affected areas is the right scope. We assess what is present before recommending either path.
What does a panel or service upgrade actually involve?
A panel upgrade replaces the breaker cabinet, the breakers, and the connections inside it. A service upgrade goes further, bringing the service entrance, the meter connection, and the main disconnect up to the amperage the property needs. Before we recommend a size, we run load calculations based on what the home or building actually draws and what is being added. The work is scoped on the call, and the price is confirmed before anything is scheduled.
What is the difference between GFCI and AFCI protection, and do I need both?
A GFCI outlet or breaker detects ground faults, which are current leaking to ground, and cuts power before it can cause a shock. It is required in wet locations: kitchens, bathrooms, garages, and outdoors. An AFCI breaker detects arc faults, which are the kind of electrical arcing inside a wall that can start a fire without tripping a standard breaker. Current code requires AFCI protection in most living spaces. Older homes frequently have neither. We test what is present during a visit and can install both where they are needed.
Faults Traced Before Anything Is Replaced
We work through the symptoms and identify the actual cause before recommending any repair. A misdiagnosed fault means parts replaced that did not need to be, and a problem that comes back.
How much electrical load does an EV charger add, and does my panel need to be upgraded first?
A Level 2 charger runs on a dedicated 240-volt circuit, typically with a 50-amp breaker, though the exact size depends on the charger's output rating. Before installation, we check the panel for available capacity and run a load calculation to confirm the service can carry the added draw without affecting other circuits. If the panel is already at capacity, a panel upgrade is part of the project. We scope both together so the quote covers the charger circuit and any panel work as a single project.
What does a backup generator hookup involve on the electrical side?
The key component is the transfer switch, which isolates your home or building from the utility line during an outage. Without it, a generator connected directly to the panel can backfeed onto the utility line and create a hazard. We install the transfer switch, run the dedicated circuit from the panel to the generator connection point, and complete the grounding and bonding the installation requires. We work with both standby hookups and portable generator connections, and we size the panel capacity for the generator load before the work begins.
What causes outlets to stop working even when the breaker has not tripped?
The most common cause is a tripped GFCI outlet somewhere upstream on the same circuit. A single GFCI outlet can protect multiple regular outlets wired after it, and if it trips, all of them lose power. The GFCI may be in a bathroom, kitchen, or garage rather than near the dead outlet. If resetting any GFCI outlets on the circuit does not restore power, the fault is more likely a loose connection at the outlet, a break in the wiring, or a failed receptacle. We trace the circuit to find the actual cause.
Older and Newer Wiring Both Handled
From knob-and-tube systems in mid-century homes to modern panel upgrades and EV charger circuits, we cover the full range of what Monmouth County properties actually need.
What do flickering or dimming lights usually mean?
Occasional flickering when a large appliance cycles on can be normal if the appliance is on the same circuit as the lights. Persistent flickering, flickering across multiple circuits, or lights that dim noticeably when nothing obvious has changed are different situations. Those can point to a loose connection at the panel, a failing breaker, a neutral wire issue, or a problem at the service entrance. Flickering that is widespread across the house is worth a call, because it often points to something at the panel rather than a single fixture.
Is it safe to use an outlet that feels warm or makes a buzzing sound?
No. Warmth at an outlet face usually means current is arcing at a loose connection inside the box. A buzzing sound points to the same thing. Both are conditions that can cause overheating in the wall cavity where you cannot see it. Stop using the outlet, do not plug anything into it, and call to have it inspected. We diagnose the outlet and the wiring behind it, not just the face of the receptacle.
Scope Agreed Before the Panel Is Opened
The price and the scope are confirmed before work begins. If we find something additional once the work is underway, we explain it and get your approval before proceeding.
Do I need to be home while the electrical work is being done?
For most work, yes. Access to the panel is required for nearly every job, and we need to be able to confirm the scope, walk through what we found, and get your approval before proceeding with anything beyond what was agreed on the call. If the work is limited to an exterior circuit or a detached structure and access can be arranged another way, we can discuss that when you call. The specifics depend on what the job involves.
How long does a panel upgrade typically take?
A straightforward panel replacement, where the service entrance is staying the same and the work is limited to the cabinet and breakers, typically takes a few hours. A full service upgrade that includes the service entrance and meter work takes longer and may involve coordination with the utility. Jobs that surface additional wiring issues inside the panel or at the service entrance add time. We give you a realistic time estimate when we scope the job on the call, before anything is scheduled.
When does a DIY electrical fix make sense, and when should I call?
Replacing a light bulb or resetting a tripped GFCI outlet is straightforward. Once the work involves opening an outlet box, working inside a panel, running new wiring, or diagnosing a fault that is not immediately obvious, the risk of getting it wrong goes up quickly. A loose connection inside a wall or panel that is not made correctly can cause overheating without triggering a breaker. If you are unsure what is causing the problem, or if the fix involves anything inside the wall or panel, a call is the right move.
Every job is different, and the right answer depends on what is actually in your home or building. Call (732) 399-4956 any day from 8:00 AM to 9:00 PM and we will walk through what you are seeing and confirm a price before anything is scheduled.
(732) 399-4956